Category: Project

Posted on

New toys in TOG Spot Welder

As always at the BBQs at tog there is fire and dismantling of stuff involved. Group of us on Sunday during the BBQ took apart an old welder that was quite useless and converted it to a spot welder check out the video down below.

 

We also put up a few more pin hole photos of which will be posted in a few weeks.

Posted on

Printing printer parts

TOG’s laserjet printer was mostly working, but the two buttons on top were stuck and unusable. Each button was supposed to have a little right-angled lever connecting it to its microswitch. The problem was that one lever had come out of its mounting, and the other one was missing altogether.

Button mechanism removed, showing where the missing lever should be.
The large button has its lever; the small one doesn’t.

Missing. Gone. Not rattling around inside the printer, or sitting in a corner of the classroom. Just gone. But we have one lever left. If only there was some way we could make a copy of it…

The part is composed of a few straightforward shapes which were modelled in OpenSCAD.

Part, sketched diagram and calipers.
Measuring the part for modelling.
OpenSCAD screenshot
Building the model in OpenSCAD.

Then the design was printed on the 3D printer.

3D printer head and half-finished print.
Printing in progress.

The first print didn’t work because there was too much of an overhang. The second, improved design didn’t stick properly to the bed (small fiddly prints benefit from a brim). The third one came out nicely.

L-R: original part, two failed prints, successful print
The learning curve.

After cutting away the brim and overhang support material, the new part fits under the button…

Same button mechanism, now with two levers.
Good as new.

… and the printer buttons are working again.

Grubby, but working, printer buttons.
Printer buttons working again.

(And if your HP2200dn has also lost its button levers, the STL file is up on Thingiverse.)

Posted on

Lemon Soap in Dublin

soapOn June 16 1904 in the novel Ulysses, Leopold Bloom got a bar lemon soap from Swenys chemist in Lincoln Place, Dublin. You can still do that to this day. He never paid for his! On Oct 13th 2013, we made lemon soap at TOG…..or lemon and oatmeal to be precise. It’s our first go at soap making, so we’ll have to see how it turns out. Like a fine wine, it needs time to mature now, so we’ll update the blog in a few weeks time. We might want some testers. If it all goes well, we might even do some more. Contact us, if you’re interested in soap making.

More pics here…….

http://www.flickr.com/photos/100047873@N08/sets/72157636518667775/